Oilpath Product Catalogue

46 SALES@OILPATH.COM.AU | 08 8277 4933 Oilpath isnot responsible foranyerrorsoromissions,or for the resultsobtained from theuseof the information in this price list.All information in this document is provided“as is”,with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information. RETURN TO INDEX OP51FC PRESSURE COMPENSATED FLOW CONTROL OP51FC Pressure Compensated Flow Co The model OP51FC is a pressure compensated swing arm adjustable flow control valve. By swinging the arm thru 90 °, the flow out the CF or controlled flow port can be varied within the range given in the specification. Any remaining flow is bypassed to the EX or excess flow port. This flow can be used to power another circuit or can be returned to tank. Once the controlled flow is set, it will remain nearly constant with variations in pressure on either the controlled or excess flow ports. Please note, if during operation the controlled flow port is blocked, then the valve will compensate in such a manner that there will also be no flow at the EX or excess flow port. With no relief valve to protect the flow in the circuit upstream, pump failure and or component damage will occur. If this situation could occur then it is recommended to fit an extra relief valve upstream or use the model OP51FCR valve. • valve can also be used as a restrictive flow control by plugging the excess flow port. • The valve model FCR51 has a built-in adjustable pressure relief. For this model, the excess flow port, labelled ( EX) must be connected to tank. • It should be noted that whenever these or any valve is used to bypass or restrict flow, heat will be generated. Steps may be required to keep system oil temperature from becoming too high. OVERALL SPECIFICATIONS • Maximum working pressure................................. 210 bar (3000 psi) • Rated flow .............................................................114 l.p.m MATERIAL SPECIFICATIONS BODY • Body ......................................................................High tensile strength cast iron • Spools ....................................................................Hardened steel chrome plated spools • Seals .......................................................................Buna - N Return to index 46 OILPATH HYDRAULICS PTY LTD sales@oilpathhydraulics.com.au Phone 08 82774933

RkJQdWJsaXNoZXIy MTMyMDE=